Reagent Bottle with Screw Cap

Reagent Bottle With Screw Cap – Borosilicate Laboratory Storage Bottle

The Reagent Bottle With Screw Cap is a laboratory storage container designed for storing and handling liquid reagents, prepared solutions, solvents, and other suitable laboratory materials. Supplied by Elmo Agencies, a trusted scientific manufacturer in Ambala, it is suitable for chemistry laboratories, educational institutions, analytical facilities, and routine laboratory storage.

A Reagent Bottle With Screw Cap provides a convenient way to store laboratory solutions while keeping the contents enclosed between uses. The threaded cap provides a secure closure, while the bottle’s transparent construction allows the stored material to be visually inspected.

The referenced model is made from borosilicate glass and is available in 100 ml, 250 ml, 500 ml, and 1000 ml capacities.

Borosilicate Glass Construction

Borosilicate glass is widely used in laboratory glassware because of its good chemical resistance, low thermal expansion, and resistance to thermal shock compared with ordinary soda-lime glass.

These properties make it suitable for many laboratory storage and preparation applications, subject to the compatibility of the specific chemical and operating conditions.

Key Features

• Borosilicate glass bottle
• Blue polypropylene (PP) screw cap
• GL45 threaded cap design
• PP pouring ring for controlled dispensing
• Permanent white enamel graduations
• Marking area for laboratory identification
• Available in 100 ml, 250 ml, 500 ml, and 1000 ml

Technical Specifications

Laboratory Applications

• Storing prepared chemical solutions
• Holding suitable liquid reagents
• Chemistry laboratory work
• Solution preparation and storage
• Educational laboratory applications
• Analytical and research laboratory use
• General laboratory sample storage

Screw Cap and Pouring Ring

The threaded PP screw cap provides a practical closure for routine laboratory storage. The pouring ring fitted around the bottle neck can help direct liquid during dispensing and reduce dripping along the outside of the bottle.

The bottle should always be used with chemicals that are compatible with both the borosilicate glass and closure materials.

Graduations and Labelling

The bottle features white enamel volume graduations for convenient reference and a marking area for identifying the contents. These markings are useful for routine laboratory handling but should not be treated as a substitute for calibrated volumetric glassware when precise volume measurement is required.

Autoclaving

Borosilicate glass bottles are commonly used in laboratory sterilization applications, but autoclaving the complete bottle assembly depends on the specific cap, pouring ring, and manufacturer’s stated temperature and pressure limits. Always follow the product’s validated specifications before sterilization.

Important Precautions

• Confirm chemical compatibility before storing reagents.
• Keep the cap properly closed when the bottle is not in use.
• Do not rely on bottle graduations for precise volumetric analysis.
• Inspect the glass for cracks or chips before use.
• Follow appropriate storage requirements for hazardous or volatile chemicals.
• Check the manufacturer’s specifications before autoclaving.

Conclusion

The Reagent Bottle With Screw Cap by Elmo Agencies is a practical borosilicate laboratory storage bottle for holding suitable reagents, solutions, and laboratory liquids. With its screw-cap closure, PP pouring ring, enamel graduations, and multiple capacity options, it is suitable for chemistry laboratories, educational institutions, analytical facilities, and routine laboratory storage applications.