Power Supplies
Showing all 15 results
-
Battery Eliminator, Physics, Power Supplies
Battery Eliminator 2-12V 2A
- Allows teachers to conduct experiments requiring a variety of direct voltages while avoiding the decreased characteristics of dry cells
- It comprised a heavy-duty transformer wound with copper wire with high lamination to prevent losses
- Regulated, multiple tapping outputs of 2,4,6,8,10 and 12 Volts DC
- 2 Amps max output
SKU: n/a -
Battery Eliminator, Physics, Power Supplies
Battery Eliminator for Physics Laboratory
Battery eliminator is designed to give the most popular battery voltages. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9V types. The voltage is conveniently selected by a rotary switch. The output is fully protected from short circuits and overloads. Battery Eliminator operates on 220V (±10 %), 50/60Hz input.
SKU: n/a -
Physics, Power Supplies, Substitutes and Fixed
Daniel Cell Substitute 1.08V
- Lab Instruments, Daniel Cell Substitute | Electronic Daniel Cell – 1.08 Volt DC Regulated.
- Input Voltage 200V AC to 240V AC Fuse 100mA.
- Output Voltage is 1.08V DC Fixed With Regulated.
- Power On/Off Switch With Indicator
- This is easy to use at all Physics Electronics Lab scientific experiments & others.
SKU: n/a -
-
Physics, Power Supplies, Substitutes and Fixed
Electronic Daniel Cell
- Electronic Daniel Cell – 1.08 Volt DC Regulated.
- Input Voltage 200V AC to 240V AC Fuse 100mA.
- The output voltage is 1.08V DC and is fixed with Regulation.
- This is easy to use at all Physics Electronics Lab scientific experiments & others.
SKU: n/a -
-
-
-
Physics, Power Supplies, Substitutes and Fixed
Leclanche Cell Substitute
- This electronic Leclanche Cell Substitute operates solely on 230V AC.
- It is an adequate replacement for the Leclanche Cell and delivers a dependable output of 1.5 Volts.
- Suitable for Physics laboratory for schools and colleges.
SKU: n/a -
Physics, Power Supplies, Transformers
Sodium Lamp Transformer 35W
- Sodium Lamp Transformer 35W,Volt-440 with 3 pin socket
- Sodium vapour lamps are also known as polarimeter lamps, used in physics lab
- In this sodium lamp transformer, high-grade lamination is used to avoid losses
- The box is made from a thick metallic sheet
- 2 pin socket is provided
SKU: n/a -
-
Physics, Power Supplies, Transformers
Step Down Transformer ( For Sonometer Experiment)
A step down transformer is used in the sonometer apparatus to reduce the voltage of the mains supply to a safe level. The mains supply voltage in India is 220 volts, which is too high for the sonometer wire to withstand. The step-down transformer reduces the voltage to a level of 6 to 8 volts, which is safe for the sonometer wire.
SKU: n/a -
Physics, Power Supplies, Transformers
Step Down Transformer (2-12V) 2A AC
- Step-down transformer rated at 2-12V/2A AC
- Voltage steps of 2V
- Made using High-Quality Copper Enamelled Transformer
- Converts high voltage from the primary coil into lower voltage in the secondary coil
- The number of turns in the primary coil is greater than the number of turns in the secondary coil
SKU: n/a
