Burette Clamp
This Burette Clamp Fisher Type holds the burette in a vertical position. It is a die-pressed mild steel clamp with V-grooved jaws and a boss to accommodate rods up to 16mm in diameter.
₹50.00 ₹100.00
- To pick up today
- Free
- More details
- More details
Burette Clamp – Fisher Type Laboratory Clamp
The Burette Clamp is a laboratory accessory designed to hold a burette securely in a vertical position during titration and volumetric analysis. Supplied by Elmo Agencies, a manufacturer in Ambala, it is suitable for school, college, chemistry, and analytical laboratories.
A Burette Clamp Fisher Type provides stable support for a burette while it is mounted on a retort stand or other compatible laboratory rod. Its V-grooved jaws are designed to grip the burette securely, helping prevent unwanted movement during liquid dispensing. The clamp includes a boss suitable for laboratory rods of up to 16 mm diameter.
Construction & Specifications
| Specification | Details |
|---|---|
| Type | Burette Clamp – Fisher Type |
| Material | Die-pressed mild steel |
| Jaw Design | V-grooved |
| Rod Capacity | Up to 16 mm diameter |
| Application | Burette support and titration setups |
Key Features
- Fisher-type laboratory clamp
- Die-pressed mild steel construction
- V-grooved gripping jaws
- Holds a burette in a vertical position
- Suitable for rods up to 16 mm diameter
- Adjustable positioning on a laboratory stand
- Suitable for routine chemistry practicals
Applications
- Acid-base titrations
- Redox titrations
- Volumetric analysis
- Solution standardization
- Chemistry laboratory practicals
- School and college experiments
- Analytical laboratory setups
How It Is Used
Attach the clamp to a compatible laboratory stand using the boss. Position the burette between the V-grooved jaws and tighten the clamp sufficiently to keep the burette stable without applying excessive pressure to the glass.
The burette should remain vertical for proper meniscus reading during titration.
Important Precautions
- Do not exceed the 16 mm rod compatibility.
- Avoid overtightening the clamp around the glass burette.
- Check the clamp and jaws for damage before use.
- Ensure the laboratory stand is stable before mounting the burette.
- Confirm that the burette is securely held before filling it.
Conclusion
The Burette Clamp Fisher Type by Elmo Agencies is a practical support accessory for securely holding burettes during titration and volumetric analysis. Its mild steel construction, V-grooved jaws, and compatibility with rods up to 16 mm diameter make it suitable for chemistry laboratories and educational practicals.
- Overview
Related products
-
Chemistry, Glassware
Liebig Condenser
- The Liebig condenser is used in chemical distillation to cool and condense gas into a liquid.
- It consists of a straight glass tube through which the gas travels, surrounded by a water jacket to help with cooling.
- In a typical laboratory setup, the condenser is clamped to a retort stand in a vertical or oblique orientation.
- The hot vapor of a liquid is introduced at the upper end of the inner tube and condenses as it comes into contact with the colder walls of the condenser.
SKU: n/a -
Chemistry, Glassware
Ganong’s Potometer
- A Ganong’s Potometer is a device that is used to measure water uptake by the plant shoot during transpiration. It is also known as a transpirometer.
- It is used to measure the transpiration rate in a laboratory.
- The Ganong’s Potometer comprises a glass tube, which is bent twice, and a glass cylinder having a wide mouth.
SKU: n/a -
Chemistry, Glassware
Kuhne’s Fermentation Tube
- A Kuhne’s Fermentation Tube made from high-quality borosilicate glass.
- Precise Measurements: Clear, easy-to-read graduations for accurate liquid measurement, with white-labelled graduations every 1mL and enamel markings every 0.1mL.
- Ideal for fermentation experiments, microbiology, biochemical studies, and education.
SKU: n/a -
Chemistry, Glassware
Wilmott’s Bubbler – Photosynthesis Experiment Apparatus (250 mL)
Wilmott’s Bubbler: a classic borosilicate-glass apparatus for demonstrating photosynthesis by observing the release of gas (oxygen) from aquatic plants under light.
- 250 mL borosilicate flask fitted with a cork and an inserted glass tube
- The second glass tube acts as a water reservoir over the upper half of the inner tube, making the rate of bubbling easy to observe
- Ideal for demonstrating the effect of light intensity on photosynthesis rate
- Widely used in Class 10–12 biology practicals (CBSE, ICSE, State Boards) and B.Sc. Botany / Life Sciences labs
SKU: n/a -
Chemicals, Chemistry
Magnesium Ribbon 25gm
- Introducing the Magnesium Ribbon 25G, a versatile item for various applications.
- Made from pure magnesium, it offers a lightweight and durable solution for experiments and industrial processes.
- Weighing 25 grams and 70 feet long, it provides ample material for your needs
SKU: n/a
