Vernier Calliper Stainless Steel
A vernier calliper is defined as a measuring device that is used for the measurement of linear dimensions. It is also used for measuring the diameters of round objects with the help of the measuring jaws.
₹350.00
- To pick up today
- Free
- More details
- More details
Vernier Calliper Stainless Steel
The Stainless Steel Vernier Calliper is a precision measuring tool designed for accurate dimensional measurements in laboratory, workshop, and educational settings. By Elmo Agencies, a Manufacturer in Ambala, this caliper features a 0–150 mm measuring range and is designed to measure external dimensions, internal dimensions, and depth. Its stainless-steel construction makes it suitable for regular practical use.
A Vernier Calliper uses a main scale and a sliding Vernier scale to obtain measurements with finer resolution than a standard ruler. The different measuring surfaces allow users to determine the dimensions of objects such as wires, rods, components, and other laboratory specimens.
Least Count of Vernier Calliper
The least count is the smallest measurement that a Vernier Calliper can resolve. For this model, the specified least count is 0.02 mm.
A commonly used formula is:
Least Count = 1 Main Scale Division − 1 Vernier Scale Division
The measurement is obtained by combining the main-scale reading with the corresponding Vernier-scale reading.
For example, if the main-scale reading is 25 mm and the applicable Vernier reading is 0.14 mm, the measured dimension would be 25.14 mm.
Specifications
| Specification | Details |
|---|---|
| Material | Hardened stainless steel |
| Least Count | 0.02 mm (0.001 inch) |
| Measuring Range | 0–150 mm |
| Measurement Types | External, internal & depth |
| Scale | Main scale + Vernier scale (mm & inch) |
| Origin | Ambala Cantt, India |
Key Features
- 0.02 mm least count
- Stainless-steel construction
- 0–150 mm measuring range
- Measures external dimensions
- Measures internal dimensions
- Measures depth
- Millimetre and inch scale markings
- Suitable for laboratory and workshop applications
Applications
- Measuring wire and rod diameters
- Internal diameter measurement
- Depth measurement
- Physics laboratory practicals
- Engineering and workshop measurements
- School and college laboratory work
- Technical training
How to Read the Vernier Calliper
To take a measurement, first note the main-scale reading immediately before the Vernier zero. Then identify the Vernier division that aligns with a main-scale marking. Multiply the corresponding Vernier reading by the specified least count and add it to the main-scale reading.
Conclusion
The Stainless Steel Vernier Calliper by Elmo Agencies is a practical precision measuring instrument with a 0.02 mm least count and 0–150 mm range. Its stainless-steel construction and ability to measure external, internal, and depth dimensions make it suitable for physics laboratories, educational institutions, workshops, and technical applications.
- Overview
Related products
-
Light & Optics, Physics, Physics Equipments
Drawing Board
- Our Drawing Board is meticulously crafted from the highest quality natural seasoned pinewood, providing users with an exceptional drawing surface that enhances the overall experience.
- It comes in 12X18″, 16X23″ and 23X32″.
- Robust natural pinewood battens have been integrated at the rear to prevent any warping, offering increased board support.
- These battens also facilitate convenient transportation of your drawing board to various locations.
SKU: n/a -
Physics, Renewable Energy Kits & Models, Solar Energy Kits, Stem Kits
Solar Wind Dynamo Model
Solar Wind Dynamo Model – Light energy is converted into electrical current, which is then transformed into mechanical energy using a motor. Another motor acts as a dynamo, converting this mechanical energy back into electrical energy. Finally, this electrical energy is converted into light energy using an LED.
SKU: n/a -
Physics, Physics Equipments, Stem Kits, Waves & Sound
Wave Motion Apparatus – 24 Pulleys
- This Wave Motion Apparatus demonstrates the form and propagation of longitudinal and transverse waves.
- It rotates a set of cams that raise and lower 24 vertical rods with plastic highlighted tips for easy viewing.
- It measures 480mm long, is sturdy, and operates almost silently.
- Eight of the rods are positioned at 90 degrees to simulate transverse wave motion. The handle features a circular scale marked in degrees of rotation.
SKU: n/a -
Physics, Physics Equipments, Waves & Sound
Tuning Fork Set of 8 – Welch Type Heavy
- Tuning Fork Set of 8 – Welch Type Heavy is an instrument commonly used in school laboratories to generate sound for various experiments.
- This set includes eight tuning forks vibrating at specific frequencies: 426.6 Hz (A), 480 Hz (B), 384 Hz (G), 341.1 Hz (F), 256 Hz (C), 288 Hz (D), 320 Hz (E), and 512 Hz (C).
- Tuning forks are typically made from a U-shaped steel bar that produces a constant pitch when struck and comes in a velvet box.
- They demonstrate concepts such as sound waves, resonance, and vibrations, making them valuable tools in physics and music classes. By using different forks, students can explore sound properties and conduct experiments related to frequency and pitch.
SKU: n/a -
Light & Optics, Physics, Physics Equipments
Light & Optics Demo Kit
- The Light and Optics Demo Kit includes a laser ray box, an adapter to power the laser ray box, 9 different lens shapes, 1 mirror, 2 arcs, and a manual.
- This is suitable for school students aged 12 to 15 years.
- This is a great STEM kit for students to conduct all their optics experiments.
SKU: n/a
